specifikacije

blagovna znamka : mayatech

meget farligt kemikalie : ingen

tehnični parametri : vrednost 2

firehjulstræk funktioner : vzorčenje

velikost : 108 * 105 * 76 mm

rc-deli in dodatki : polnilci baterij

brug : fjørnstyrede veskusler og toyegøy

za vrsto vozila : letalo

poreklo : Kitajska

dele/adresjoner til nadgrading : litiumbatteri

perefioriudstyr/fjernbetjeningsenheder : polnilnik baterij

količina : 1 kos.

material : plastika

orodja : razred prevajalnika

številka modela : d6 pro

sikkertosmeasartementen ved brug af litiumbatterier/opladere

① hold dig vek fra brandfarlige materialer under opladning, og oplad i et övert og ventileret omredde!

② preprečuje polnjenje pri visokih/nizkih temperaturah;

③ baterije, der alreadye har oplevet en opladdingsafbrydelse, skal bortskaffes omgående på en miljøvenlig øjde og må ikke genbruges;

④ povezava s pozitivnim in negativnim polom se lahko pojavi pri afbrydes bateriji in povzroči eksplozijo;

⑤ kakršna koli škoda, ki jo povzroči baterija ali osebna škoda zaradi neupoštevanja instruktionsne skal bæres af brugeren;

⑥ preobremenitev ali preobremenitev ikke baterije. skader på batterye prävässit af ermenske overoplade eller -aflading kan ikke rettrechts;

⑦ når du bruger en balanceret oplader til opladning, skal du sojre for at connect den pravilen i sönne til hakraten. konkornte opladningsmetoder kan skaden skade på batterye og endda fære til sikkertoyuklyker, og consektene vil blive bært af brugeren.

Opozorilo glede porabe baterije:

driftsspällungen for litiumbattterier bör ikke reduktorji do manj kot 3,6 v/s, da det ellers vil povzročijo trajno skade ali evenda skrap af bateriten.

① istočasno dvokanalni kanal, hkrati stojim pri oplade to batteryer uden at spoorteer hinnaden, unfällig utgang, stojim til at oplade batteryer med överge spällunger, kapäktäter og mærker separat. kort sagt er det integrationen af ​​​​​​​to 325w opladere.

② den kitajski meni se prikaže na stor skärm, og intellungsne for pladingsstatus er tejdne med et enkelt blik. Dan lahko nastavite na kitajščino in angleščino.

③ rezervirajte grenesflade za nadgradnjo usb, som kan updatersysteme opladersysteme när som helst,

④ equipped with a 5v2a usb output interface, it can be connected to digital devices for fast charging.

⑤ supports wireless charging, allowing mobile phones to be charged as soon as they are released, making it convenient, simple, and fast.

⑥ use the mobile app to set up charging.

difference between d6/d6 pro:

d6

external power supply is required, which can be supplied by a power pack or a switch power supply. the input voltage range is 6.5-30v

d6 pro

built in 200w power supply

(note: it is not a built-in battery) the rest is the same as d6. it is also possible to connect an external switch power supply or battery pack to achieve greater working power.

specification

brand: hota

model no. d6 pro

input voltage:ac 100 ~ 240v / dc 6.5 ~ 30v

charge current 0.1~15a × 2

charge power：dc 325w × 2(650w)

ac 200w（support power distribution）

discharge power nternal discharge:15w × 2(balance port 10w）

external discharge:325w × 2(650w)

battery type: lihv/lipo/life/lilon/lixx: 1 ~ 6s

nizn/nicd/nimh : 1 ~ 16s

smart battery : 1~6s

lead acid(pb) : 2~24v

enelop : 1~16s

balance current ：max 1600ma × 2

discharge current 0.1~3a × 2

external discharge current 1~15a × 2

usb output: 5v / 2.1a

dimensions :108 × 105 × 76mm

net weight ：555g

instructions for charging two channels simultaneously, but not fully charged at the same time

the power of the two channels is automatically allocated. if you operate channel 1 first and then channel 2, then channel 2 will be satisfied first, which means that the power of channel 2 will be higher, and vice versa.

for example, if you set 15a charging for channel 1, the power of channel 1 may directly increase to around 170 180w. if you also set 15a for channel 2, the power of the power supply will automatically meet the requirements of channel 2 for your subsequent operation. as a result, the power of channel 1 will automatically decrease, and the current will also decrease accordingly.

the difference between d6 and d6pr0 chargers is that d6 is a single charger that requires a dc power supply to be used

d6pr0 is a built-in power supply that can be used for household electricity. in addition, d6pr0 also supports external power supply

both chargers support battery internal resistance detection function

d6 pro

built in 200w power supply, the rest is the same as d6, and can be connected to an external switch power supply or power pack to achieve greater working power

d6 charger

external power supply is required, which can be connected to a switch power supply or a power pack. the input voltage range is 6.5-30v

hota d6 pro (except for the color difference, the outer packaging and product size and weight of d6 pr0 are the same)

hota d6